Attune Knee Videos - High Failure Rate

Attune Knee Videos

Below are some of our videos explaining the potential dangers of Attune Knee, and especially the high failure rate. To learn more about the types of injuries that have been linked to this medical device, and the legal claims that have been filed, click Attune Knee.


The Ring of Fire Addresses the Lawsuits Involving Attune Knee

Read Transcript

Farron Cousins: The decision to have surgery is not one that many people in this country -- or really anywhere in the world -- take very lightly. But in some instances, say for example if you need a hip or a knee replacement, that decision comes pretty easily when compared to the option of living with a lifetime of pain.

But some of these devices that do get implanted in people -- hip replacements, knee replacements, and everything in between -- can become defective as the patient proceeds with basically normal movement, normal lifestyle changes.

And right now, I have attorney Daniel Nigh here with me. Daniel has handled some litigation against some of the biggest medical device implant manufacturers in this country. And Daniel, one of the newest product defects that we're seeing today is with this product called Attune Knee. What exactly is this implant? What does it do? What is it for? What kind of people might have this implanted?

Daniel Nigh: Sure. The DePuy Attune Knee, it's commonly used during a total knee replacement. There are upwards to hundreds of thousands of these knee implants that have been used between 2011 and today.

Farron Cousins: Wow.

Daniel Nigh: So it's commonly used. If you had a knee replacement in the last six or seven years, you probably have somewhere between a 10 to 30% chance of having this knee replacement inside of you.

Farron Cousins: Okay, so this is when ... Like you said, total knee replacement, everything, they come in. It's all a metal joint, essentially.

Daniel Nigh: That's right.

Farron Cousins: So any time you're putting any kind of metal in your body, as we've seen from other lawsuits -- hips, knees, and like I said, everything in between -- it's gonna come with a little bit of risk.

But the risk with the Attune Knee is actually slightly different from some of the cases we've seen in the past. What's happening with this particular implant?

Daniel Nigh: What we're seeing with this implant, it's actually called tibial de-bonding. And what that means is the tibial baseplate of the implant -- there's two main parts of a knee replacement implant -- the tibial baseplate, the cement that you would apply to the underside of the tibial baseplate, and it's supposed to be able to put that baseplate in to the tibia and cement in to where the bone sticks to the tibial baseplate.

What's happening here is the cement is not bonding to the tibial baseplate, so without cement bonding to the tibia, you've basically got this loose part just flapping all around inside of there. You won't notice it for maybe the first year or so, but in time, as you move on that knee more and more, there's gonna be problems with it.

Farron Cousins: Right, and as I said in the intro, here, these devices just through the normal wear and tear of life -- walking around, doing normal things, sitting down, standing up -- they're supposed to last, in many cases, decades. 15, 20 years before it needs to be replaced.

But a lot of these, and especially with the Attune Knee, I believe that one is about a 15-ish year implant. We're talking about a year and a half to two years after implantation, it has come unglued from the bone.

Daniel Nigh: That's right.

Farron Cousins: And that leads to these horrible surgeries to correct the problem, which oftentimes are more intense than the initial replacement surgery.

Daniel Nigh: Yeah, that's right. Everything you said. You would expect your knee implant to last you 15, 20 years. Some people, really conservative estimates, 10 to 12.

But a lot of these clients that I represent aren't getting anywhere near this amount of time. We're commonly seeing that, on the early side, they'll fail in one and a half to two years. Sometimes it takes five years to fail. But that's still nowhere near as long as that person should have had, and then it requires them to have an early revision surgery, which is a difficult surgery.

They've gotta go back under the knife. That revision surgery is more difficult than the initial surgery. The recovery time is oftentimes 20 to 50% longer than what it was for the initial surgery. And then the other problem is now they've accelerated their time of needing revision surgeries in the future, too.

Farron Cousins: And what's really awful about this is, when these people have to go in just even for the first surgery to get the replacement, you're essentially putting your body, your life out of commission for months. It's a very long recovery. And then when you finally get back active, you can have a normal life again. Then you find out a year later it's gone bad, you have to get it fixed. Then you're once again looking at months and months of recovery, surgery costs, and expenses.

These people are sacrificing a lot of their lives. If they just took a couple months off to have the surgery done in the first place two years ago, their employer may not be willing to say, "I can't give you another three months on this. I'm sorry. We're gonna have to let you go".

There are all kinds of costs and trials that these people have to go through just because this company perhaps didn't do their due diligence in creating this product or letting people know about the problems, and it creates a world of pain -- emotional, physical, financial -- for anyone who has to go through this.

Daniel Nigh: That's right. Those are all the problems we're seeing. We see it day to day with clients that tell us about the real life struggles that they're having that you just explained. And when we get in to the documents from the company, we oftentimes find out that they knew about these issues and that they were trying to cover it up.

We're early on in this project, but we've seen this time and time again with these big manufacturers and medical device companies, and we usually see they knew, and they failed to warn anybody because they wanted to protect their profits.

Farron Cousins: And one thing -- you and I have actually talked about this in the past -- is that, with medical devices, the approval process is a lot different than if you have a new pharmaceutical or even a similar pharmaceutical. What's it like with medical devices? How do they do that?

Daniel Nigh: Well, with medical devices, there are two ways you can get approval. There's about five percent of the devices out there that get approval through what a lot of people would think of the approval process from the FDA.

We call it pre-market approval, and that's where you bring your clinical trials to the FDA, you show that you've done many different clinical trials to test this product both short-term benefits and long-term results. Then the FDA takes a long look at it and gives it a pre-market approval.

But then only five percent are getting through that way. Then we have what we call the 510K process, which is where 95% of the products get on the market -- and is the way that DePuy Attune Knee was approved -- where you show enough to say that this product is substantially similar to another product on the market and you get your rubber stamp.

Farron Cousins: So basically, "Hey, here's our new knee. But it looks a lot like theirs, acts a lot like theirs, similar components. Can you go ahead and approve this? I've got a surgery scheduled for 2:00 this afternoon."

Maybe not that intense, but basically, that's what it is. And this is the way the system is designed. The FDA help set this up. I'm sure, obviously, a lot of the millions that are spent each year by the pharmaceutical markets helped to get that rule in place.

But that's the kind of system we're looking at, here. It seems that, at almost every level, it is rigged against consumers. It's rigged against patients because the FDA wants to give these medical device companies and pharmaceutical companies what they want. The companies want to get out there, start selling these products, get 'em in as many people as possible.

And every time, it's that consumer that bears all the risk and suffers the most from any negligence that may happen at any step of the way. Whether it's the company or the FDA, the consumer's always the one that always takes that hit.

Daniel Nigh: Yeah, that's right, and I would say even further -- along with what we were saying before -- Big Pharma gets so many protections with the FDA process, but the medical device companies get even more.

That's why, recently, we've been seeing a trend of more medical device problems than possibly even the pharmaceutical problems. Because they are just getting these rubber stamps, and they're getting on to the market.

Farron Cousins: Well, Daniel, it's great to know that we have people like you out there working every day. I know you got a long road ahead of you with this Attune Knee product, but we appreciate your work. Keep at it, thank you very much.

Daniel Nigh: Absolutely, thank you.